XTCM320 32 inch industrial panel PC
The XTCM320 is a 32 inch Windows portrait terminal with 1080×1920, an i5-3320M, 4G + 128G SSD and a built-in 80mm auto-cutter printer.
Technical specifications
| Projects | Specifications |
|---|---|
| Operating system | Windows 10 |
| Processor / memory | Intel i5-3320M; 4G + 128G SSD |
| Screen | 32 inch capacitive touch screen, 1080×1920 portrait |
| Scan engine | 2D imaging, 640×480 CMOS |
| Printing | Built-in 80mm auto-cutter printer |
| Ports | USB ×4; HDMI ×1; Ethernet ×1 |
| Network | WiFi; wired Ethernet |
| Power | Built-in 220V supply |
| Installation | Wall bracket included |
| Options | NFC reader, ID card reader module, card swipe module |
Who this model suits
Suits workstations like these
- Self-service check-in and reporting with ticket printing at the shop entrance
- Dispatch check: scan to verify and print the note
- Passage positions needing large text and on-site tickets
- Replaces the large screen, box PC and printer combination
Not recommended here
- Workstations under 0.8m wide
- Display without tickets (21.5 inch costs less)
- Where the unit has to be moved
What to check when fitting it to a workstation
| Stage | How it works |
|---|---|
| Where it mounts | The included wall bracket mounts to a wall or pole with the screen centre 1.4–1.6m above the floor; the print outlet is below, so leave 15cm for the ticket. |
| Power supply | Built-in 220V supply with a dedicated breaker; the printer and screen share one circuit, kept off power strips used by high-draw equipment. |
| Paper | 80mm thermal paper roll with auto cutter; feed 3–5mm after each print to reduce paper sticking to the cutter. |
| What to Connect | Ethernet to the business system, USB for a scanner or keyboard, with NFC, ID card and card swipe modules per project. |
Workstation Photos
How it compares in the series
| Model | Screen | OS | Processor / memory | Installation |
|---|---|---|---|---|
| XT802C | 5 inch 720×1280 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | Z bracket included, four mounting holes |
| XT802D | 8 inch 800×1280 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | Z bracket with four holes included |
| XT802E | 10.1 inch 800×1280 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | Z bracket with four holes included |
| XT802F | 15.6 inch 1366×768 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | VESA01 standard hole pattern |
| XT802E-X86 | 10.1 inch | Windows | Intel J1900 quad-core 2.0GHz; 4G + 64G, 8G + 128G available to order | Z bracket with four mounting holes |
| XT802F-X86 | 15.6 inch 1366×768 | Windows | Intel J1900 quad-core 2.0GHz; 4G + 64G, 8G + 128G available to order | VESA01 hole pattern |
| XT802G-X86 | 11.6 inch | Windows | Intel J4125 quad-core 2.0GHz; 8G + 128G, configurable | VESA bracket (optional) |
| XTCM215 | 21.5 inch, ten-point touch; 1080×1920 portrait | Windows | Intel Celeron J1900 quad-core 2.00GHz; DDR3 4G + 64G SSD | Wall bracket included |
| XTCM320 | 32 inch, 1080×1920 portrait | Windows | Intel i5-3320M; 4G + 128G SSD | Wall bracket included |
FAQ
How long does a built-in printer roll last?
With 80mm thermal paper and about 15cm per ticket, a 60m roll prints roughly 400 tickets. Actual life depends on ticket length; keep a spare roll at the counter and change it through the hatch below the body.
Is 32 inch too large?
A 32 inch portrait unit stands about 0.75m tall, which suits passages and entrances; at a single-operator workstation it feels imposing, and 21.5 or 15.6 inch fits better there.
How do we clear a paper jam?
Power off, open the hatch and pull the paper out in the feed direction, then check the cutter for debris; do not lever the cutter with a sharp object. For long-term use, clean the print head and cutter quarterly.
Can it run our self-service software?
Windows 10 runs standard desktop programs, and the printer uses the standard Windows driver. Drivers and a test page can be preinstalled, and a peripheral reference sheet ships with the unit.
Neighbouring models in the series
XT802F-X86
XT802F-X86 is a 15.6 inch Windows 10 industrial panel PC with 1366×768, Intel J1900 and 4G + 64G.
See specs and selection →
XTCM215
XTCM215 is a 21.5 inch Windows portrait all-in-one with 1080×1920, 10-point touch and J1900 quad-core + 4G + 64G SSD,
See specs and selection →Describe your workstation and we will provide a configuration you can install directly
Describe the process, cycle time, scanning distance and software environment (MES / ERP / in-house), and we will provide a model, bracket and port proposal within 24 hours.