XT802F 15.6 inch industrial panel PC
The XT802F is a 15.6 inch Android 11 industrial panel PC with a 1366×768 landscape screen, a 382×261×35mm body and 2.38kg weight.
Technical specifications
| Projects | Specifications |
|---|---|
| Operating system | Android 11, Debian / Ubuntu available to order |
| Processor / memory | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order |
| Screen | 15.6 inch capacitive touch screen, 1366×768 |
| Scan engine | 2D imaging, 640×480 CMOS; field of view 40° horizontal / 29° vertical / 49.4° diagonal |
| Supported symbologies | Common 1D barcodes, 2D codes and QR; paper and on-screen codes |
| Ports | RJ45 Ethernet ×1; RJ11 COM ×1; USB3.0 ×1; USB2.0 ×3; audio ×1; power button ×1 |
| Network | 2.4G / 5G WiFi; wired Ethernet; Bluetooth 5.0 |
| Power | DC 12V (adapter included); PoE version 48V |
| Body / weight | 382 × 261 × 35mm; 2.38kg |
| Installation | VESA01 standard holes; wall bracket, floor stand, swing arm |
| Operating environment | 0~50℃, indoor; add a sunshade where sunlight falls directly |
| Options | MRZ / ID OCR, colour and print, custom packaging |
Who this model suits
Suits workstations like these
- Line-side board: output, cycle time, defect rate, machine status
- Multi-operation summary workstations showing several data columns side by side
- A shop-floor information screen readable at around 2 m
- Training or initial sample check positions where drawing detail matters
Not recommended here
- Small single-operator workstations (takes space and the viewing angle is worse)
- Long lists in portrait (21.5 inch portrait suits better)
- Windows board software needed (choose the XT802F-X86)
What to check when fitting it to a workstation
| Stage | How it works |
|---|---|
| Where it mounts | VESA01 holes for a wall bracket or swing arm; for a board position, keep the centre 1.5–1.6m above the floor with viewers 1.5–3m away; at a workstation, lower it to 1.2–1.3m. |
| Power supply | DC 12V or PoE; on a swing arm, run the harness inside the arm so constant movement does not wear the sheath. |
| What to Connect | Ethernet to MES or the board service, USB for a stack light or speaker, RS232 to the line PLC for status. |
| Brightness | Overhead lights reflect off the screen; tilt it face down 10–15° or add a baffle, which works better than raising brightness. |
Workstation Photos
How it compares in the series
| Model | Screen | OS | Processor / memory | Installation |
|---|---|---|---|---|
| XT802C | 5 inch 720×1280 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | Z bracket included, four mounting holes |
| XT802D | 8 inch 800×1280 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | Z bracket with four holes included |
| XT802E | 10.1 inch 800×1280 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | Z bracket with four holes included |
| XT802F | 15.6 inch 1366×768 | Android | RK3566 quad-core 1.8GHz; 4G + 64G, 2G + 32G available to order | VESA01 standard hole pattern |
| XT802E-X86 | 10.1 inch | Windows | Intel J1900 quad-core 2.0GHz; 4G + 64G, 8G + 128G available to order | Z bracket with four mounting holes |
| XT802F-X86 | 15.6 inch 1366×768 | Windows | Intel J1900 quad-core 2.0GHz; 4G + 64G, 8G + 128G available to order | VESA01 hole pattern |
| XT802G-X86 | 11.6 inch | Windows | Intel J4125 quad-core 2.0GHz; 8G + 128G, configurable | VESA bracket (optional) |
| XTCM215 | 21.5 inch, ten-point touch; 1080×1920 portrait | Windows | Intel Celeron J1900 quad-core 2.00GHz; DDR3 4G + 64G SSD | Wall bracket included |
| XTCM320 | 32 inch, 1080×1920 portrait | Windows | Intel i5-3320M; 4G + 128G SSD | Wall bracket included |
FAQ
As a board, how far away is the 15.6 inch readable?
At 1366×768, 24–32px numbers and headings read clearly at 2–3m; beyond 4m, enlarge the type or move to the 21.5 inch XTCM215. Actual legibility depends on font, contrast and ambient light, so measure it on site during the sample stage.
Can it be mounted portrait?
Yes, the body supports portrait mounting, but a 15.6 inch unit stands almost 0.4m tall with a high centre of gravity, so the arm needs a sufficient load rating. For long portrait lists, the 21.5 inch XTCM215 (1080×1920) fits better.
The board runs 24 hours a day. How stable is it?
The unit is fanless and runs Android, so long-term reliability depends mainly on power and cooling. Use the original adapter, leave space behind the plate for airflow, and schedule a daily restart in the application; volume projects can request a 72-hour burn-in test.
With touch, will operators tap it by accident?
Board mode can show the app read-only with touch limited to set areas, or you can order a non-touch configuration. Where scan confirmation is needed, put the engine trigger below the screen rather than making the whole panel live.
Neighbouring models in the series
XT802E
XT802E is a 10.1 inch Android 11 industrial panel PC with 800×1280 resolution, housing 242×173×35mm, weight 878g,
See specs and selection →
XT802F-X86
XT802F-X86 is a 15.6 inch Windows 10 industrial panel PC with 1366×768, Intel J1900 and 4G + 64G.
See specs and selection →
XTCM215
XTCM215 is a 21.5 inch Windows portrait all-in-one with 1080×1920, 10-point touch and J1900 quad-core + 4G + 64G SSD,
See specs and selection →Describe your workstation and we will provide a configuration you can install directly
Describe the process, cycle time, scanning distance and software environment (MES / ERP / in-house), and we will provide a model, bracket and port proposal within 24 hours.